Mô tả sản phẩm
ECMA-C31020FS+ASD-A2023-AB
ECMA-C31020FS+ASD-A2023-AB
SPECIFICATIONS OF SERVO DRIVE
|
MODEL |
ASD-A2023-AB |
|||
|
CORRESPONDING SERVO MOTOR |
ECMA-C31020_S (S=22MM) ECMA-E31320_S(S=22MM) ECMA-E31820_S(S=35MM)
|
|||
|
POWER |
2KW |
|||
|
POWER SUPPLY |
PHASE / VOLTAGE |
THREE-PHASE: 170~255VAC,50 / 60HZ ±5% |
||
|
CONTINUOUS OUTPUT CURRENT |
9.1 ARMS |
|||
|
COOLING METHOD |
FAN COOLING |
|||
|
ENCODER RESOLUTION /FEEDBACK RESOLUTION |
2500PPR / 10000PPR |
|||
|
CONTROL OF MAIN CIRCUIT CONTROL |
SVPWM CONTROL |
|||
|
TUNING MODES |
AUTO/ MANUAL |
|||
|
DYNAMIC BRAKE |
BUILT-IN |
|||
|
POSITION CONTROL MODE |
MAX. INPUT PULSE FREQUENCY |
MAX. 500KPPS (LINE DRIVER) / MAX. 200KPPS (OPEN COLLECTOR) |
||
|
PULSE TYPE |
PULSE + DIRECTION, A PHASE + B PHASE, CCW PULSE + CW PULSE |
|||
|
COMMAND SOURCE |
EXTERNAL PULSE TRAIN / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS AND P-CURVE FILTER |
|||
|
ELECTRONIC GEAR |
ELECTRONIC GEAR N/M MULTIPLE N: 1~32767, M:1:32767(1/50<N/M<200) |
|||
|
TORQUE LIMIT OPERATION |
SET BY PARAMETERS |
|||
|
FEED FORWARD COMPENSATION |
SET BY PARAMETERS |
|||
|
SPEED CONTROL MODE |
ANALOG INPUT COMMAND |
VOLTAGE RANGE |
0 ~ ±10 VDC |
|
|
INPUT RESISTANCE |
10 KΩ |
|||
|
TIME CONSTANT |
2.2 US |
|||
|
SPEED CONTROL RANGE*1 |
1 : 5000 |
|||
|
COMMAND SOURCE |
EXTERNAL ANALOG SIGNAL / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS AND S-CURVE FILTER |
|||
|
TORQUE LIMIT OPERATION |
SET BY PARAMETERS OR VIA ANALOG INPUT |
|||
|
RESPONSIVENESS CHARACTERISTIC |
MAXIMUM 450HZ |
|||
|
SPEED FLUCTUATION RATE *2 |
0.01% OR LESS AT LOAD FLUCTUATION 0 TO 100% (AT RATED SPEED) |
|||
|
0.01% OR LESS AT POWER FLUCTUATION ±10% (AT RATED SPEED) |
||||
|
0.01% OR LESS AT AMBIENT TEMPERATURE FLUCTUATION 0 TO 50 DEGREE CENTIGRADE (AT RATED SPEED) |
||||
|
TORQUE CONTROL MODE |
ANALOG COMMAND INPUT |
VOLTAGE RANGE |
0 ~ ±10 VDC |
|
|
INPUT RESISTANCE |
10 KΩ |
|||
|
TIME CONSTANT |
2.2 US |
|||
|
COMMAND SOURCE |
EXTERNAL ANALOG SIGNAL / INTERNAL PARAMETERS |
|||
|
SMOOTHING STRATEGY |
LOW-PASS FILTER |
|||
|
SPEED LIMIT OPERATION |
PARAMETER SETTING OR VIA ANALOG INPUT |
|||
|
ANALOG MONITOR OUTPUT |
MONITOR SIGNAL CAN SET BY PARAMETERS (OUTPUT VOLTAGE RANGE: ±8 V) |
|||
|
COMMUNICATION INTERFACE |
RS-232 / RS-485 / RS-422 |
|||
| MODEL | ECMA-C31020FS |
| PRODUCT NAME | ELECTRONIC COMMUTATION MOTOR |
| SERVO TYPE | AC SERVO |
| NAME OF THE SERIES | ASD-A |
| RATED VOLTAGE | 220V |
| SENSOR TYPE | 2500PPR |
| MOTOR FRAME SIZE | 100 MM |
| TYPE OF SHAFT DIAMETER AND OIL SEAL | KEYWAY WITH BRAKE W/O OIL SEAL |
| SHAFT DIAMETER | S=22MM |
| RATED POWER OUTPUT | 2000W |
| RATED TORQUE (N-M)*1 | 6.37 |
| MAX. TORQUE (N-M) | 19.11 |
| RATED SPEED | 3000 RPM |
| MAX. SPEED | 5000 RPM |
| RATED CURRENT (A) | 12.05 |
| MAX. CURRENT (A) | 36.15 |
| TORQUE CONSTANT-KT (N-M/A) | 0.53 |
| VOLTAGE CONSTANT-KE (MV/(R/MIN)) | 19.2 |
| ARMATURE RESISTANCE (OHM) | 0.13 |
| ARMATURE INDUCTANCE (MH) | 1.50 |
| ELECTRICAL TIME CONSTANT (MS) | 11.4 |
| INSULATION CLASS | CLASS A (UL), CLASS B (CE) |
| INSULATION RESISTANCE | > 100 M OHM , DC 500 V |
| INSULATION STRENGTH | 1500V AC, 60 SECONDS |
| WEIGHT (KG) (WITH BRAKE) | 7.2 KG |
| MAX. RADIAL SHAFT LOAD (N) | 490 |
| MAX. THRUST SHAFT LOAD (N) | 98 |
| POWER RATING (KW/S) (WITH BRAKE) | 82.0 |
| ROTOR INERTIA (× 10-4KG.M2) (WITH BRAKE) | 4.95 |
| MECHANICAL CONSTANT (MS) (WITH BRAKE) | 0.66 |
| BRAKE HOLDING TORQUE [NT-M (MIN)] | 8.0 |
| BRAKE POWER CONSUMPTION(AT 20 °C ) [W] | 19.4 |
| BRAKE RELEASE TIME [MS (MAX)] | 10 |
| BRAKE PULL-IN TIME [MS (MAX)] | 70 |
| VIBRATION GRADE (ΜM) | 15 |
| OPERATING TEMPERATURE | 0~40 DEGREE CENTIGRADE |
| STORAGE TEMPERATURE | -10~80 DEGREE CENTIGRADE |
| OPERATING HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| STORAGE HUMIDITY | 20% TO 90% RH (NON-CONDENSING) |
| VIBRATION CAPACITY | 2.5G |
| IP RATING | IP65 |
| APPROVALS | CE UL |
Đánh giá
Chưa có đánh giá nào.