Mô tả sản phẩm
HG-MR23J+MR-J4-20B 1.5A 200W 0.64NM 3000RPM OIL SEAL AC SERVO MOTOR DRIVE KIT WITH 3M CABLE NEW
| HG-MR23J+MR-J4-20B 1.5A 200W 0.64NM 3000RPM OIL SEAL AC SERVO MOTOR DRIVE KIT WITH 3M CABLE NEW |
MOTOR SPECIFICATIONS:
| SERVO MOTOR MODEL HG-MR_ | 053(B) | 13(B) | 23(B) | 43(B) | 73(B) | |
| POWER FACILITY CAPACITY [KVA] | 0.3 | 0.3 | 0.5 | 0.9 | 1.3 | |
| CONTINUOUS RUNNING DUTY | RATED OUTPUT [KW] | 0.05 | 0.1 | 0.2 | 0.4 | 0.75 |
| RATED TORQUE [NM] | 0.16 | 0.32 | 0.64 | 1.3 | 2.4 | |
| MAXIMUM TORQUE [NM] | 0.48 | 0.95 | 1.9 | 3.8 | 7.2 | |
| RATED ROTATION SPEED [RPM] | 3000 | 3000 | 3000 | 3000 | 3000 | |
| MAXIMUM ROTATION SPEED [RPM] | 6000 | 6000 | 6000 | 6000 | 6000 | |
| PERMISSIBLE INSTANTANEOUS ROTATION SPEED | 6900 | 6900 | 6900 | 6900 | 6900 | |
| RATED CURRENT [A] | 1.0 | 0.9 | 1.5 | 2.6 | 5.8 | |
| MAXIMUM CURRENT [A] | 3.1 | 2.5 | 5.3 | 9.0 | 20.0 | |
| WEIGHT [KG] | 0.34 | 0.54 | 0.91 | 1.4 | 2.8 | |
| WEIGHT [KG]( WITH ELECTROMAGNETIC BRAKE) | 0.54 | 0.74 | 1.3 | 1.8 | 3.8 | |
DRIVE SPECIFICATIONS:
| MODE NAME | MR-J4-20B | |
| STOCKED ITEM | S | |
| OUTPUT | RATED VOLTAGE | 3-PHASE 170 VAC |
| RATED CURRENT (A) | 1.5 | |
| MAIN CIRCUIT
POWER SUPPLY |
VOLTAGE/FREQUENCY | 3-PHASE OR 1-PHASE 200 VAC TO 240 VAC, 50/60 HZ |
| RATED CURRENT (A) | 1.5 | |
| PERMISSIBLE VOLTAGE FLUCTUATION | 3-PHASE OR 1-PHASE 170 VAC TO 264 VAC | |
| PERMISSIBLE FREQUENCY FLUCTUATION | ±5% MAXIMUM | |
| CONTROL
CIRCUIT POWER SUPPLY |
VOLTAGE/FREQUENCY | 1-PHASE 200 VAC TO 240 VAC, 50/60 HZ |
| RATED CURRENT (A) | 0.2 | |
| PERMISSIBLE VOLTAGE FLUCTUATION | 1-PHASE 170 VAC TO 264 VAC | |
| PERMISSIBLE FREQUENCY FLUCTUATION | ±5% MAXIMUM | |
| POWER CONSUMPTION (W) | 30 | |
| INTERFACE POWER SUPPLY | 24 VDC ±10% (REQUIRED CURRENT CAPACITY: 0.3 A (INCLUDING CN8 CONNECTOR SIGNAL)) | |
| LOAD-SIDE ENCODER INTERFACE | MITSUBISHI HIGH-SPEED SERIAL COMMUNICATION | |
| TOLERABLE REGENERATIVE POWER OF THE BUILT-IN REGENERATIVE RESISTOR(W) | 10 | |
| CONTROL METHOD | SINE-WAVE PWM CONTROL/CURRENT CONTROL METHOD | |
| DYNAMIC BRAKE | BUILT-IN | |
| PROTECTIVE FUNCTIONS | OVERCURRENT SHUT-OFF, REGENERATIVE OVERVOLTAGE SHUT-OFF, OVERLOAD SHUT-OFF (ELECTRONIC THERMAL), SERVO MOTOR OVERHEAT PROTECTION, ENCODER ERROR PROTECTION, REGENERATIVE ERROR PROTECTION, UNDER-VOLTAGE PROTECTION, INSTANTANEOUS POWER FAILURE PROTECTION, OVER-SPEED PROTECTION, ERROR EXCESSIVE PROTECTION, MAGNETIC POLE DETECTION PROTECTION, LINEAR SERVO CONTROL FAULT PROTECTION | |
| FULLY CLOSED LOOP CONTROL | AVAILABLE IN THE FUTURE | |
| SAFETY FUNCTION | STO (IEC/EN 61800-5-2) | |
| COMMUNICATION FUNCTION | USB: CONNECT A PERSONAL COMPUTER (MR CONFIGURATOR2 COMPATIBLE) | |
| STRUCTURE (IP RATING) | NATURAL COOLING, OPEN (IP20) | |
| CLOSE MOUNTING | POSSIBLE | |
| WEIGHT (KG) | 0.8 | |
Đánh giá
Chưa có đánh giá nào.